1, the division of equipment control, centralized panel operation, easy to control.

2, the main functions of the panel include: two-stage length count, label position is not affected by the tape stop positioning; Label length count, cycle count, speed display; Second start, fixed point automatic switch axis.

3, can carry out automatic exchange axis: after the stripping equipment winding operation is completed, the two axes automatic exchange, easy operation, high efficiency.

4, with arched development wheel: This development wheel is a unique bow design, completely eliminate the tape in the development or feeding process wrinkling phenomenon.

5, pneumatic brake: when the slitter equipment stops, the tape can be stopped instantly, accurate positioning, accurate labeling.

6, feeding adjustment wheel: the material lock on the raw material shaft only need to gently press the handle, the left and right displacement adjustment is easy.

7, with low noise facilities: the raw material shaft press wheel is equipped with a silencer, the noise is reduced to a minimum in the slitting operation.

8. The tape taken by the slabbing equipment after slabbing is clear and transparent.

9. The finished product rate of strip roll is high.